SW-5 and SWB-5 Speed Reducers
SW-5 Solid and Hollow Output Shaft Features
  • SW-5 are 5-1/2" high x 7-3/8" wide x 5-9/16" or 5-1/8" deep overall
  • Compression-molded glass-fill polyester gear box
  • Bronze gear precision-hobbed
  • Steel ground worm gears
  • Input shaft is 1/2" O.D. ground and polished steel
  • Input shafts are supported by sintered bronze bushings sealed to retain lubrication and keep out dirt
  • Hollow output shaft is 3/4" I.D. x 1-1/4" O.D ground and polished steel
  • Solid output shaft 5/8" OD ground and polished steel
  • Hollow and Solid output shafts run in sintered bronze bushings
  • Input and output shafts have anti-friction thrust bearings
  • Net weight is 9 pounds
  • Available in ratios from 5:1 to 100:1
  • Supplied factory lubrication grease
  • SW-5 gear boxes solid and hollow shaft speed reducers mounting feet may be positioned at any one of eight locations. Additional mounting position options are available here.
SWB-5 Solid and Hollow Output Shaft Features
  • SWB-5 are 5-1/2" high x 7-3/8" wide x 5-9/16" or 5-1/8" deep overall
  • Compression-molded glass-fill polyester gear box
  • Bronze gear precision-hobbed
  • Steel ground worm gears
  • Input shaft is 1/2" O.D. ground and polished steel
  • Input shafts are supported on shielded precision ball bearings
  • Hollow output shaft is 3/4" I.D. x 1-1/4" O.D ground and polished steel
  • Solid output shaft 5/8" OD ground and polished steel
  • Output shafts run in sintered bronzed bushings
  • Input and output shafts have anti-friction thrust bearings
  • Net weight is 9 pounds
  • Available in ratios from 5:1 to 100:1
  • Supplied factory lubrication oil
  • SWB-5 solid and hollow shaft speed reducers mounting feet may be positioned at any one of eight locations. Additional mounting position options are available here.
  Custom for SWB-5 and SWB-5
  • Stainless steel shaft (Please specify series stainless needed)
  • Longer shaft lengths on input and output
  • Internal keyways on Hollow Output Shaft

Custom solutions to meet your specific application needs.

To place an order, please call 800-544-6642 or email our sales department

MODELS SW-5 AND SWB-5S RATIOS, RATING AT 1800 RPM INPUT
RATIO
INPUT H.P.
OUTPUT H.P.
OUTPUT RPM
IN. LBS. TORQUE*
5:1
.94
.8
360
140
9:1
.68
.55
200
175
18:1
.4
.3
100
190
25:1
.3
.22
72
190
36:1
.23
.15
50
190
50:1
.15
.10
36
190
100:1
.12
.06
18
195
* At lower speeds, the torque ratings shown may be increased up to 50%

PulleysBall Thrust BearingsRight Angle Gear BoxesSprocketsAbout UsNewsContact UsSite Map Home

1246 High Street, Fairport Harbor, Ohio 44077 USA • U.S. Calls: 800-544-6642 | P: 440-352-8995 | F: 440-352-7682 • sales@torquetrans.com

Privacy Policy